|
101.
Same as #100 -- with twin support legs and overall height
84”
102. Custom trough tank 10’0” L x 96” W x
48” H OD
103. 6’3” L x 23” W x 10” H OD rectangular
flat bottom sloped to 11” H (62 gal) custom “Z” bar supports
on bottom ends to through bolt legs
104. Custom waterfall overflow attached to
7’0” L x 36” W x 36” H OD rectangular flat bottom (300 gal)
105. Custom solid divider installed in
8’0” L x 48” W x 12” H OD rectangular flat bottom (210 gal)
106. Custom support attachment for
removable divider installed in 15’10” L x 46” W x 36” H OD
rectangular flat bottom (965 gal)
107. Custom built rectangular tank 16’0” L
x 11’ W x 4’ H OD
108. Custom built “V” bottom trough tank
with twin support legs
109. Custom built collection trough in
bottom of 12’ 6” D x 4’ H OD 2-piece round tank
110. Custom built grotto aquarium 8’ 4” L
x 3’ H with no top cross support
111. Custom built rectangular aquarium 16’
L x 6’ W x 7’ H
112. 4’6” L x 28” W x 26” Side H x 32”
Center Height OD rectangular aquarium with sloped bottom
(150 gal)
113. 10’0” L x 36” W x 24” Side H x 27”
Center Height OD rectangular aquarium with sloped bottom
(385 gal)
114. 5’8” L x 56” W x 54” H OD rectangular
flat bottom aquarium (585 gal)
115. 10’ 6” L x 5’ 3” W x 4’ H OD 1/2
round grotto aquarium (1,175 gal)
116. 15’ 6” L x 7’ 9” W x 4’ H OD 1/2
round grotto aquarium (2,650 gal)
117. 12’ 6” L x 6’ 3” W x 4’ H OD 1/2
round grotto aquarium (1,688 gal)
118. 8’ 6” D x 4’ H OD 3/4 round grotto
aquarium (1,125 gal)
119. 15’ 6” D x 4’ H OD 3/4 round grotto
aquarium (3,975 gal)
120. Same as #119
121. 4’ 10” D x 3’ H OD round flat bottom
(310 gal) with 20” x 12” x 1/8” thick polycarbonate viewing
windows
122. 6’6” D x 4’ side H x 50” center H OD
5° sloping bottom with skirt legs for support and 57”
overall H (795 gal) with 28” x 20” x 1/8” thick
polycarbonate viewing
windows
123. 10’6” D x 8’ side H x 101” center H
OD 5° sloping bottom with box legs for support and 112”
overall H (4,735 gal) with 20” x 12” x 1/8” thick
polycarbonate viewing
windows. Tank assembled at factory with wide load permit
required for shipment.
124. 11’ 8” L x 6’ W x 3’ deep flat bottom
ornamental fish pond (1,000 gal)
125. 14’ 8” L x 7’ W x 3’ deep flat bottom
ornamental fish pond (1,500 gal)
126. 19’ 8” L x 7’ 6” W x 3’ deep flat
bottom ornamental fish pond (2,200 gal)
127. Installation of pond #125
128. Interior plumbing of pond #125
129. Exterior plumbing of pond #125
130. Installation of pond #125
131. Gluing gravel to top of pond coping
132. Finish gravel before plants & fish
were added
133. Interior plumbing of pond #134
134. 20’ 6”L x 8’ 6” W x 4’ side H x 5’
center H tapered bottom ornamental fish pond with an overall
depth of 7’ 6” (4,000 gal)
135. Exterior plumbing of pond #134
136. Fishing for tilapia in pond #134
137. Finished installation of pond #134
with Koi
138. Various ponds ready for shipment on
48’ flat bed
139. 4’ 8” D x 26” side H x 58” center H
round 60° cone bottom (300 gal) used as pre filter sump
140. 7’ 7” L x 57” W x 57” Deep (400 gal)
combination settling chamber/filter
141. Same as #140
142. Skimmer with deep basket and fish
barrier screen, scoop return jets with 2’ PVC “T”, and 3”
bottom drain with dome top
143. Installations of skimmer, auto water
fill, and return jets
144. Same as #143
145. 2’ 6” W x 6” Deep stream connector
146. Same as # 145 -- Stream connector
attached with fiberglass to pond and rubber liner ready for
installation
147. Same as #145 -- Water test on
partially finished stream
148. 58” L x 32” W x 32” H fiberglass Rock
149. Same as #148 -- Used to protect pond
equipment
150. 10’ L x 8’ W x 6’ H fiberglass pump
house
151. 20” D x 4’ H up flow sand filter (50
gal)
152. Same as #151
153. Same as #151 -- Custom built protein
skimmer
Abbreviation Codes D =
Diameter H = Height L = Length W = Width OD = Outside
dimension |
